About Gold

Pure gold (fine gold) is softer than pure silver but harder than tin. Its beauty and luster are unmatched by any alloyed golds. The extreme malleability, ductility, and softness of pure gold make it practically useless for jewelry applications.

The addition of alloying elements (other metals) to gold are used to increase the toughness and hardness of the metal. While almost any metal can be alloyed (melted) with gold, only certain metals will not dramatically change the color or make the metal brittle. The addition of indium, for instance, turns gold purple and gives gold the workability of glass.

Over time, certain percentages of gold have become legally recognized "karats." The karat indicates the amount of gold as a percentage of the total, i.e. 24 karat is 100 percent gold. Thus 14 karat is 14/24's gold or 58-1/3 percent gold. Gold standards vary around the world. In the United States, 18, 14, and 10 karat gold are the only karats allowed to be sold as karated gold.

In karated gold, there is a balance of metals in the non-gold percentage. These metals provide the various colors and hardness of karated golds. Typical alloying elements and their color effect are:

Copper : Reddening
Silver : Greening
Zinc : Bleaching
Nickel : Whitening
Palladium : Whitening

Examples of the compositions of different colors are:

Yellow Gold: copper, silver, zinc
White Gold: copper, nickel, zinc
Red Gold: copper
Green Gold: silver

Adjusting the proportions of coloring agents provides the array of colors on the market. Additional metals enhance properties such as castability, grain size, hardness, corrosion resistance, color, workability, ultimate strength, and others. These additions can dramatically change the properties of the karated metal for better or worse.

Knowing how the additions will affect the metal greatly enhances the possibility of a superior final product. In deep drawing of metals, it is important to have a metal which will elongate or stretch a great deal before fracturing, thus high ductility. The requirement for an earring post would be a high tensile strength (a great deal of force needed to get the material to permanently deform, bend). It is imperative to select the proper karated composition for the desired application.

D.D. Designs Resources

[The Four C's]

[About Gold]

[Birth Stones]

[Gem Care]

[Why Does Gold Discolor Fingers?]

[Measuring Stones]

[Traditional Wedding/Anniversary Stones]

[Weights]

[Diamond Weights & Sizes]